ENTRYPHONE

OFFICE 0207 609 5073 ENGINEER LINE 07973 954696

Home

Door Entry

ALARMFIX repair install and maintain this type of system

REPLACEMENT , BUTTONS, DOOR RELEASE, HANDSETS , MONITORS ,PANELS, SPEAKER UNITS

YOU COULD REPLACE YOUR EXISTING AUDIO SYSTEM WITH VIDEO

ENTRYPHONE.

Entryphone is a British manufacturer, established in 1958. Products are designed and manufactured with the belief that once installed a system should remain a functional and serviceable part of the building for as long as it is required.

There is therefore no such thing as an obsolete “Entryphone”. Spare parts for every product are available.

Entryphone apparatus is designed to be easily installed and simple to maintain. Entryphone systems are not complicated and do not incorporate the latest microchip technology - the internal circuitry is based on well known and established telephone and closed circuit T.V. principles and full technical information can be provided on any product.

Audio, video and coded access systems are all available in very cost effective stainless steel finish, flush or surface mounted and offering backlit nameplates as opposed to permanent engraving. Panels are also available in Brass finish.

200-PTS

Description	A video wall-mounted loudspeaking press-to-speak telephone with an integral 2.5" LCD colour screen
Colour	BT White
Material	ABS
Dimensions	H 90mm W 195mm D 38mm

Desk kit conversion available

201V

Description	A video wall-mounted telephone with integral 2.5" colour LCD screen
Colour	BT White
Material	ABS
Dimensions	H 195mm W 90mm D 60mm

Also available in 2 and 4 button versions.
Desk kit conversion available (900-VMT only)

201V4

Description	An audio wall-mounted telephone set alongside a 4" LCD monitor providing a larger screen not obstructed by the handset.
Colour	BT White
Material	ABS
Dimensions	H 195mm W 205mm D 60mm

Also available in 2 and 4 button versions for internal intercom use and with indicator lamps and ringer mute switch
Desk kit conversion available

900-VMT

Description	Wall mounted video monitor telephone with 4" flat high resolution black and white CRT screen
Colour	Light Ivory
Material	ABS
Dimensions	H 216mm W 210mm D 50mm

Also available in 6 and 10 button versions for internal intercom use.
Desk kit conversion available (900-VMT only)

201

Description	Wall mounted audio telephone
Colour	BT White
Material	ABS
Dimensions	H 195mm W 90mm D 60mm

Also available in 2 (202), 4 (204) and 10 (210) button versions for internal intercom use.
Also available 201-S one button telephone fitted with two LED's and cut-out switch
Desk kit conversion available

8802

Description	Wall mounted two button telephone
Colour	Light Ivory
Material	ABS
Dimensions	H 200mm W 70mm D 57mm

Also available in 6 (8806) and 10 (8810) button versions for internal intercom use.
Also available 8802-S Two button telephone fitted with two LED's and cut-out switch
Desk kit conversion available (8802 only)

5901

Description	Wall mounted one button telephone
Colour	Ivory
Material	High Impact Polystyrene
Dimensions	H 240mm W 89mm D 89mm

Also available in 2, 5 and 10 button versions for internal intercom use.
Desk kit conversion available (5901 & 5902 only)

9200/1

Description	Single Button Entrance Panel
Finishes	Standard - Stainless steel Un-lacquered polished brass Mirror finish stainless Painted textured hammer bronze
Dimensions	H 216mm W 89mm D

Also available in 6 and 10 button versions for internal intercom use.
Desk kit conversion available (900-VMT only)

9200 A-type

Description	'A' Type Multi Button Entrance Panel - all panels 115mm wide
Finishes	Standard - Stainless steel Un-lacquered polished brass Mirror finish stainless Painted textured hammer bronze
Dimensions	W 115mm D 38mm Heights [A2 & A3 - 355mm] [A4,A5,A6 - 406mm] [A9 - 483mm] [A12 - 540mm] [A15 - 606mm]
Dimensions

Note: not available in 7,8,10,11,13,14, 16 and above button versions
Standard supplied with back box. Also available with oak or stainless steel frame.

9200 B-type

Description	'B' Type Multi Button Entrance Panel
Finishes	Standard - Stainless steel Un-lacquered polished brass Mirror finish stainless Painted textured hammer bronze
Dimensions	W 203mm H 241mm D 38mm

Available in 2,3,4,5,6,7 & 8 button versions
Standard supplied with back box. Also available with oak or stainless steel frame.

9200 C-type

Description	'B' Type Multi Button Entrance Panel
Finishes	Standard - Stainless steel Un-lacquered polished brass Mirror finish stainless Painted textured hammer bronze
Dimensions	W 292mm D 38mm Heights [C10,C12,C14,C16 - 241mm] [C18 - 264mm] [C20,C22,C24,C27 - 330mm] [C30-352mm]

Note: not available odd no. versions (except C27)
Standard supplied with back box. Also available with oak or stainless steel frame.

VR A-type

Description	Multi Button Entrance Panel Supplied in S (single column of buttons) or D (double column of buttons) Stainless steel shrouded buttons Tamper proof fixings Black filled engraved numbers
Finish	Brushed Stainless Steel
Dimensions	W 115mm D 38mm Heights [VRS/A2&3, VRD/A4&6 - 355mm] [VRS/A4,5&6, VRD/A8,10&12 - 406mm]

Available only as special order
Standard supplied with back box. Also available with oak or stainless steel frame.

VR B-type

Description	Multi Button Entrance Panel Supplied in S (single column of buttons) or D (double column of buttons) Stainless steel shrouded buttons Tamper proof fixings Black filled engraved numbers
Finishes	Standard - Stainless steel Un-lacquered polished brass Mirror finish stainless Painted textured hammer bronze
Dimensions	W 203mm H 241mm D 38mm

Available only as special order
Standard supplied with back box. Also available with oak or stainless steel frame.

VR C-type

Description	Multi Button Entrance Panel Supplied in S (single column of buttons) or D (double column of buttons) Stainless steel shrouded buttons Tamper proof fixings Black filled engraved numbers
Finishes	Standard - Stainless steel Un-lacquered polished brass Mirror finish stainless Painted textured hammer bronze
Dimensions	W 292mm D 38mm Heights [VRS/C10,C12,C14 and VRD/C20,C24,C28- 241mm] [VRS/C16,C18,C20 and VRD/C32,C36,C40- 330mm] see back boxes and surface frames

Available only as special order
Only available in even numbers
Standard supplied with back box. Also available with oak or stainless steel frame.

Video Conversion Kit

All 9200 and VRpanels can be ordered as video versions or updated to video when required. The 92CCK module, incorporating minature high resolution solid state CCD camera, is designed to be fitted behind the speech module; updating to video could not be simpler.

Back Boxes and Surface frames

One Button Panels (excluding 92CA/1-S)

Stainless Steel Surface Frame supplied as standard with the following dimensions

Audio H 217mm W 91mm D 40mm
Video H 217mm W 91mm D 52mm

Metal Back boxes are available with the following dimensions

Audio H 203mm W 76mm D 32mm
Video H 203mm W 76mm D 50mm

Oak surface frames are available with the following dimensions

Audio H 216mm W 89mm D 32mm
Video H 216mm W 89mm D 50mm

Multi Button Panels

Stainless Steel Back Box supplied as standard
The panel overlaps the back box by 19mm all the way round. Therefore to calculate the size of any particular back box reduce the panel dimension by 38mm.

ie: Panel size of a VRD/A10 is H 406mm W 115mm
the back box dimensions therefore are (406-38) 368mm by (115-38) 77mm

Metal Surface Frames are also available
Dimensions are the same as panel size plus allow 3mm for thickness of material
Depth 52mm for both audio and video applications

Oak Surface Frames are also available
Dimensions are the same as panel
Depth 40mm for both audio and video applications

Polished brass

All entryphone entrance panels are available to special order in mirror finish polished brass. These panels are supplied un-lacquered and therefore it is necessary to protect and maintain their finish with regular use of brass polish. It is also very important not to use excessive amounts of polish as this will, over a period of time, clog up the microphone and speaker grills and interfere with the operation of the buttons.